You’ve got two countertop quotes on the kitchen table, maybe three, and none of them look alike. One is a single number per square foot. Another is a page of lines with words like “eased edge” and “undermount prep.” One mentions the sink cutout and the other doesn’t, and now you’re wondering whether that’s an extra or something they left off.
That confusion is common, and it doesn’t mean you missed anything. One homeowner who shopped around wrote, “I got quotes from 6+ places and each priced in a different basis with some charging and others not charging for everything from sink to outlets to templating to online layout.” Another asked a forum, “Are you finding that countertop places charge an extra fee for the sink cutout?” and got a straight answer: “Yes, they’re going to charge for the cutout. It’s extra labor and skill to get it right.” The cutout gets paid for either way, so the quote worth trusting is the one that shows you where.
The short answer on what belongs in the estimate
What should a countertop estimate actually include?
Every part of the job as its own line, with one total: the slab named by brand, color and thickness, the square footage, template, fabrication, edge profile, each cutout, removal of the old tops, install, and sealing if it’s natural stone. It should also say what isn’t included, like plumbing reconnection or a tile backsplash, so you can compare two quotes line for line.
The stone itself, named so nobody has to guess
The first section of a good estimate is the material, and it should be specific enough that nobody can quietly swap it. That means the brand and color for quartz, or the stone name for granite and quartzite, plus the thickness. One fabricator’s advice was to “get the exact slab brand and lot number in writing,” which makes sense, because two slabs sold under the same color name can look different side by side.
Then comes the square footage. A countertop forum regular said to count the “square footage of all stone (tops, caps, side splash, backsplash)” and round up. If one quote measured only the counters and another counted the four-inch splash along the wall, their per-foot prices can’t be compared until you know that, so ask each one what its square footage covers.
If you haven’t picked the stone yet, the material line may be an allowance. That’s fine as long as it’s labeled as one and the rate for going over it is written right beside it. We walked through what happens when that’s left off in why a countertop quote goes up after you pick the slab.
The work that turns a slab into a countertop
This is where quotes drift apart, because fabrication is a bundle of separate jobs and shops price them differently. Look for each of these, either as its own line or clearly marked as included:
- The template, which is the measure of your cabinets that the fabricator cuts from.
- Fabrication, meaning the cutting, polishing and finishing of each piece.
- The edge profile. One stone shop put it well: “The style of the finished edge should be clearly stated.” A plain eased edge and a decorative ogee take different amounts of labor, so the edge should be named on the paper.
- Every cutout: the sink, a drop-in cooktop, faucet holes, a soap dispenser. Each hole gets its own mention. One homeowner learned why when “the sink was excluded from the order and thus we did not get a hole cut in our countertop for the sink.”
- The seams, how many there are and roughly where they’ll fall.
You don’t need prices next to these to read them well. What you’re checking is that each item is accounted for, so a line that shows up on one quote and is missing from another stops being a mystery and becomes a question you can ask.
The parts of the job that happen in your kitchen
The house side of the job is what people forget to look for, and in a lot of Yorktown Heights and Mohegan Lake kitchens it’s real work. Many of these homes still have 1990s tile counters or laminate from the last refresh, and those come off before anyone templates, so removal and disposal should have their own line. (If the tops you have are sound stone and you just don’t love them anymore, old granite can often be refinished instead.)
Getting the cabinets ready belongs on the estimate too. The boxes under old tops are often fine, but they’re rarely level, and shimming them before the template is what keeps a seam from being one you can feel later. After that comes delivery and install, plus sealing if you’ve chosen granite, which counts for a bit more in the parts of Yorktown and Somers on hard well water. The countertop page goes through how that level check and seam plan get handled before anything is cut.
A complete estimate also says what it leaves out. The usual exclusions are disconnecting and reconnecting the sink and faucet, the cooktop hookup, and any new tile backsplash. One homeowner said the questions they ended up asking were “where they would place seams, if would I have to find someone else to install the new sink and facet, deposit, and how many days between demo and install.” Those answers belong on the page. And if you’re moving the sink instead of replacing the counters in place, that means plumbing and a Town of Yorktown permit, so the estimate should say who handles both.
The paperwork around the price
There’s more to a complete estimate than the numbers. Look for a payment schedule, and check that the deposit is tied to milestones and isn’t the whole price up front. Look for warranty terms in writing. And look for what happens if the stone shows up cracked or chipped, which should be a replacement, as we covered in what to do when a new countertop arrives cracked.
It’s also reasonable to ask for a certificate of insurance and the contractor’s license number. Westchester County licenses home improvement contractors, and that number goes on the contract.
Lining up two quotes side by side
Once you’ve got two or three estimates, set them out in columns: material and square footage, template, fabrication, edge, each cutout, removal, install, sealing, and exclusions. Wherever one quote has a line and another says nothing, call and ask whether it’s included. Usually it is, sometimes it isn’t, and either way a vague difference turns into a specific one.
A low total can still be complete and a high one can still be fair. Once the columns line up, you can see what you’re choosing between, and that’s usually when the decision gets easy.
What you get when you call
When you call Yorktown Kitchen and Bath about counters, we connect you with a licensed local remodeler who measures in person and gives you a written, itemized estimate with the exclusions listed. The slab, template, fabrication, install and cutouts are separate lines with one total, and if any part is an allowance, the overage per foot is on the page before you visit the yard. You approve the slab and the seam plan before anything is cut, and any change after that comes to you as a written change order you approve first. If the counters are one piece of a bigger kitchen remodel, it’s priced the same way.
If you’re holding a quote that raises more questions than it answers, or you’d like a countertop estimate that lists every line from the start, call us at (914) 228-6746. Tell us whether the kitchen’s in Yorktown Heights, Jefferson Valley, Somers or Cortlandt Manor, and we’ll connect you with a licensed remodeler who’ll go through it with you line by line.
Last updated November 16, 2026